Influence of case-carburizing and micro-defect on competing failure behaviors of Ni–Cr–W steel under gigacycle fatigue

Axial loading test was performed to investigate the influence of case-carburizing and micro-defect on competing failure behaviors of Ni–Cr–W Steel under gigacycle fatigue. The interior failures induced from inclusion and microstructural inhomogeneity become the predominant failure mode in the life regime beyond 10⁵ cycles. The case-carburizing has no effect on the fatigue strength with interior failure. Compared with the lower limit values of experimental S–N data, the predicted results by using GP distribution is relatively suitable. From the viewpoint of reliability, the modeling method of interior S–N curve with the maximum defect size at a given probability is satisfactory.     

Numerical simulation of lithium‐ion battery performance considering electrode microstructure

A spatially resolved three‐dimensional microscale model of a lithium‐ion battery half‐cell is developed and applied to periodic electrode microstructures made up of spherical particles following a bidisperse particle size distribution. The geometries of the periodic unit cells are derived from discrete element simulations using periodic boundary conditions. Three different particle arrangements, which consist of two layered structures and one mixed particle array, as well as three different compression rates, are considered. In the study, the cathode is assumed to consist of LiMn₂O₄ as active material. Layered particle arrangements comprising the particle fraction of the smaller particle size in the region close to the separator are found to be beneficial especially for high‐rate applications. According to the simulation results, the high‐rate capability is reduced upon compression of the electrode microstructures. Copyright © 2015 John Wiley & Sons, Ltd.     

An improved particle swarm optimisation for unit commitment in microgrids with battery energy storage systems considering battery degradation and uncertainties

Using electric storage systems (ESSs) is known as a viable strategy to mitigate the volatility and intermittency of renewable distributed generators (DGs) in microgrids (MGs). Among different electric storage technologies, battery energy storage (BES) is considered as the best option. In unit commitment (UC) module, the set of committed dispatchable DGs along with their power, power exported to/imported from macrogrid and status and power of ESS units are determined. In this paper, BES degradation is considered in UC formulation and an efficient particle swarm optimisation with quadratic transfer function is proposed for solving UC in BES‐integrated MGs, while the uncertainties of demand, renewable generation and market price are considered and dealt with robust optimisation. UC is formulated as a multi‐objective optimisation problem whose objectives are MG operation cost and BES degradation. The resultant multi‐objective optimisation problem is converted into a single‐objective optimisation problem and the effect of weight factors on MG operation cost and BES lifecycle are investigated. The results show that by consideration of BES degradation in objective function, BES lifecycle increases from 350 to 500 and the minimum depth of charge increases from 5.5% to 34%; however, MG operation cost increases from $8717 to $8910.2. The results also show that by consideration of uncertainties, MG's operation cost increases by 8.22%.     

The effect of the exposed crystal plane on the antioxidant activity of nanoceria

Previous reports have noted that exposed crystal planes could affect the antioxidant activity of nanocerias, although the synthesized nanocerias used in those studies had different exposed crystal planes, as well as different sizes and morphologies. In order to better understand the effect of the crystal planes on the antioxidant activity of the materials, two types of nanocerias with similar morphology and size distribution but different crystal planes were synthesized using the hydrothermal method (CeO₂–H) and the ultrasonic template method (CeO₂–U). The antioxidant activities of the nanocerias were further explored within different ·OH concentrations in the reaction system. The experimental results showed that there is an obvious difference in the antioxidant activity of the two types of nanocerias in the lower free radical concentration system due to the effects of exposed crystal planes. CeO₂–U, with more active crystal planes (100), had stronger antioxidant activity. However, with the increase in the ·OH concentration in the reaction system, the difference in the antioxidant activity of the two nanocerias decreased. This research will increase our understanding of the antioxidant activity of the exposed crystal planes on nanocerias.     

工业园区混合能源优化配置方法应用与实践

为了充分挖掘多能源之间的互补潜力,使工业园区混合能源系统的配置方式由传统粗放式转变为精确优化配置并降低系统配置方案的保守性,基于粒子群联合CPLEX求解算法对工业园区的系统配置和运行调度方案进行分析优化,并以某生物园区为例进行了实例分析,得到了目标函数下的最优设计方案和运行策略。仿真分析结果表明,优化配置方法的应用能够协调冷热电多种能源的混合利用,提升系统的综合经济性。同时,为工业园区能源供应项目的规划、设计提供参考性支撑,丰富设计手段。     

Proteolytic regulation of the extent of dietary proteins with skin grape proanthocyanidin and anthocyanidin's interactions

During technological processing, proanthocyanidins and anthocyanidins could be partly lost due to the complexation phenomena, affecting food and beverage nutritional properties, organoleptic properties and health-promoting potentials. A common issue is encountered when processing food and beverage which is binding of phenolics to dietary proteins. The present investigation aims at evaluating the proteolysis contribution, using pure protease (Pepsin, 3000 units g⁻¹), to protein–anthocyanidin and protein–proanthocyanidin interactions. Bovine serum albumin (BSA), ovalbumin (OVA) and casein (CAS) dietary protein models were used. High-performance liquid chromatography coupled to diode array detector (HPLC-DAD) and size exclusion chromatography analyses proved that pepsin treatment significantly (P > 0.05) decreased the ratio of flavonoids’ interaction with tested proteins . The proteolysis reduced anthocyanidin interactions with CAS, OVA and BSA by 64.88%, 57.37% and 42.87% respectively. Similarly, proanthocyanidins interaction with CAS, OVA and BSA were reduced by 34.23%, 13.74% and 2.39% respectively. This study provides the basis to develop innovative technologies to limit protein–flavonoid complexation during food and beverage processing.     

Grain boundary segregation and its influences on ionic conduction properties of scandia doped zirconia electrolytes

Solid oxide fuel cell is a promising energy conversion system which converts chemical energy into electrical energy directly. Electrolyte is the key component and determines the working temperature. In this paper,ceria and scandia co-doped zirconia electrolytes sintered from 1300 to 1550 ℃ were chosen as research objects. Scanning electron microscopy, X-ray diffraction and transmission electron microscopy were performed to characterize the ceramic samples. The effects of grain size and grain boundary element segregation on the electrical conductivity were focused. Electrochemical impedance spectroscopy was used to calculate the bulk, grain boundary and specific grain boundary conductivity. Results show that the bulk and grain boundary ionic conductivity increases with the increasing grain size.However, the specific grain boundary conductivity decreases with the increasing grain size. This is explained by the fact that Sc~(3+) is segregated at the grain boundary, which leads to higher oxygen vacancy concentration when sintered at lower temperature.     

基于限定PSO初始化空间的随机最大似然算法

针对随机最大似然算法（SML）在波达方位（DOA）估计中由于多维非线性优化导致计算复杂度大的问题，提出一种限定粒子群（PSO）算法搜索空间的SML算法。该算法克服了一个缺陷，即在采用ESPRIT算法限定PSO初始化空间时，在阵列结构是非均匀线性阵列而且信号是相干信号时ESPRIT算法不能直接处理信号，且需要采用一组预处理技术，这增加了算法计算的复杂度。提出的算法的关键之处在于采用假设技术确定初始化点来代替ESPRIT算法的解，结合克拉美罗界（CRB）确定PSO算法的初始化解空间。这一方法不必再采用预处理技术，且利用限定PSO初始化空间的算法大大降低了SML算法的计算复杂度。实验结果表明，提出的算法为相干情况和非相干情况都提供了相当好的初始值。最后，将该算法与许多现有算法进行比较，验证提出算法的有效性和准确性。     

镁钛复合处理对不锈钢凝固组织的影响及机制

摘要：TiN是铁素体不锈钢有效的异质形核剂，但钢中大尺寸的TiN颗粒会对不锈钢板材表面质量带来不利影响。为此，提出依靠镁钛复合处理来细化TiN颗粒及控制宏观晶粒的方法。通过良好气氛保护的电阻炉试验，研究了添加Mg和Ti元素对于铁素体不锈钢宏观铸态组织和TiN颗粒细化效果的影响规律，并对其细化机理进行了详细分析。经研究得知，向铁素体不锈钢中添加了微量Mg和Ti元素后试样宏观等轴晶比例由37%提高至50%，TiN颗粒平均尺寸由处理前的5μm细化至2μm。镁钛复合处理后，钢液中形成的MgO和MgAl2O4与TiN之间的晶格错配度很低，分别为1.14和5.29，均属于有效形核范围，可以成为TiN异质形核核心，促进在晶内均匀析出更多的TiN。同时基于TiN与铁素体相之间的良好的晶格匹配关系，其进一步促进了δ-Fe形核，从而有效细化了铁素体宏观组织，这将有利于提高铁素体不锈钢力学性能和表面质量。     

轧机垂直系统动力学参数辨识

 针对轧机垂直系统动力学参数可信度不足等问题，提出一种基于实测数据的改进粒子群算法辨识轧机垂直系统动力学参数的方法。首先,将轧机垂直系统刚度和阻尼考虑成达芬振子和范德波尔振子，构建轧机垂直系统非线性动力学模型，并对粒子群算法进行改进；然后，通过数值仿真算例辨识得到系统在感染噪声和不含噪声时的动力学参数，验证了该算法的有效性；最后，以现场某轧机垂直系统为研究对象，基于现场实测数据，应用该算法进行辨识，得到了轧机垂直系统动力学参数估计，通过实测位移、速度和加速度信号分别与辨识后的位移、速度和加速度信号进行对比，证明该方法辨识轧机垂直系统动力学参数结果可靠，具有一定的工程应用价值。